|

Forks at Northstar Forklift
Did you know that 10% wear on a pair of forks reduces their capacity by 20%!
In
fact, ISO safety standards for used forks require that they be replaced
when your fork wear exceeds 10%. That's why the ANSI standard for fork
wear inspection is at least once every 12 months.
Northstar Forklift carries a wide selection of forks and accessories. These include:
- Hook Forks (Class 2, 3, 4.)
- Shaft Forks
- Hook Block Forks (Class 2 & 3)
- Shaft mounted Block Forks
- Fork Extensions
- Carpet Poles (Class 2 & 3)
- Fork Inspection Calipers
- Pin Kit Assemblies (Class 2, 3, 4.)
All forks are available in your choice of Tip, Taper, and Polish.
|